Wyze Thermostat Not Heating? Quick Fixes to Try Now!

If your Wyze thermostat is not heating, check the settings and power source first. Ensure the thermostat is set to heat mode and the power supply is connected properly.

If the issue persists, try resetting the thermostat and contacting customer support for further assistance. Proper maintenance and troubleshooting steps can help resolve the heating problem efficiently. Keep reading to find out more about common reasons for thermostat heating issues and how to address them effectively.

Identifying The Issue


When your Wyze thermostat is not heating, it can be frustrating and uncomfortable. However, by identifying the issue, you can take the necessary steps to resolve the problem. In this section, we will discuss the symptoms of heating failure and how to confirm the connectivity of your Wyze thermostat.

Symptoms Of Heating Failure

If you’re experiencing heating failure with your Wyze thermostat, it’s important to understand the symptoms so that you can effectively troubleshoot the issue. Here are some common signs to look out for:

  • No warm air coming from the vents
  • The thermostat displays a low or inaccurate temperature
  • The heating system turns on but quickly shuts off
  • Uneven heating throughout your home

Confirming Your Wyze Thermostat Connectivity

Before delving into the troubleshooting process, it’s crucial to confirm that your Wyze thermostat is properly connected. Follow these steps to check the connectivity:

  1. Ensure the Wyze thermostat is securely mounted on the wall.
  2. Check the power source and make sure it is functioning correctly.
  3. Verify that the thermostat is connected to your home’s Wi-Fi network.
  4. Confirm that the Wyze app is up to date and installed on your mobile device.
  5. Restart your Wi-Fi router and reconnect the thermostat to the network.

By following these steps, you can confirm the connectivity of your Wyze thermostat and rule out any potential issues with the installation or wireless connection.

If you have successfully identified the symptoms of heating failure and confirmed the connectivity of your Wyze thermostat, you are now ready to move on to the troubleshooting process. In the next section, we will explore common causes of heating failure and provide solutions to help you get your thermostat back to heating your home effectively.

Pre-troubleshooting Checks

Ensure your Wyze Thermostat is not heating by checking power supply, thermostat settings, and HVAC system compatibility. Verify wiring connections and reset the thermostat if needed before seeking professional assistance.

If you are experiencing issues with your Wyze thermostat not heating, there are a few things you can check before calling a professional. Before delving into complex troubleshooting, it’s important to perform some preliminary checks to ensure that the issue isn’t due to something simple. In this post, we’ll go over some pre-troubleshooting checks that you can perform to get your Wyze thermostat back up and running.

Power Supply Verification

The first thing you should check is the power supply of your Wyze thermostat. To do this, you can follow these steps:

  1. Make sure that the thermostat is properly connected to the power source.
  2. Verify that the power outlet is working by plugging in another device.
  3. If the power outlet is working, check the thermostat’s power switch to ensure that it is turned on.
  4. If the thermostat is battery-powered, check to see if the batteries need to be replaced.

Circuit Breaker And Fuse Inspection

If the power supply is not the issue, the next thing to check is the circuit breaker and fuse. You can follow these steps to perform this check:

  • Check the circuit breaker to ensure that it is not tripped. If it is tripped, reset it and see if the thermostat turns on.
  • If the circuit breaker is not tripped, check the fuse that controls the thermostat. If the fuse is blown, replace it and see if the thermostat turns on.
  • If you’re unsure how to check the circuit breaker or fuse, consult a professional.

By performing these pre-troubleshooting checks, you can rule out simple issues and potentially save time and money. If the issue persists, you may need to call a professional to diagnose and fix the issue with your Wyze thermostat.

Thermostat Settings Review

Experiencing issues with your Wyze thermostat not heating? It’s crucial to review the thermostat settings to ensure proper functionality and warmth in your home. Check the temperature settings and schedule to troubleshoot and resolve any heating issues efficiently.

Thermostat Settings Review: Wyze Thermostat is a smart and efficient device that enables you to control the temperature of your home with ease. However, it’s common to experience issues with heating, and the culprit can often be found in the thermostat settings. In this section, we’ll review the key thermostat settings that can affect the heating performance of your Wyze Thermostat. Temperature Calibration: Temperature calibration is the process of adjusting the thermostat’s temperature reading to match the actual temperature in your home. If your Wyze Thermostat is not heating correctly, it could be due to inaccurate temperature readings. To calibrate your thermostat, follow these steps:

1. Go to the thermostat settings menu.

2. Select “Temperature Calibration.”

3. Follow the instructions to adjust the temperature reading.

Schedule and Time Settings Adjustment: Your Wyze Thermostat’s schedule and time settings determine when and how often your heating system runs. If these settings are incorrect, your thermostat may not be heating your home when you need it. To adjust these settings, follow these steps:

1. Go to the thermostat settings menu.

2. Select “Schedule and Time.”

3. Adjust the settings to match your desired heating schedule.

Other Factors to Consider: In addition to the above settings, there are other factors that can affect the heating performance of your Wyze Thermostat. These include:

1. Poor insulation in your home.

2. Dirty air filters.

3. Blocked vents or ducts.

To ensure your Wyze Thermostat is heating your home efficiently, it’s important to address these factors as well.

In conclusion, if your Wyze Thermostat is not heating correctly, it’s likely due to incorrect thermostat settings. By adjusting the temperature calibration and schedule/time settings, you can improve the heating performance of your thermostat. Additionally, addressing other factors such as poor insulation and dirty air filters can further improve the efficiency of your heating system.

Basic Thermostat Resets

To reset the Wyze thermostat and resolve the heating issue, start by turning off the furnace power switch. Remove the thermostat cover and press the reset button. Hold it down for a few seconds, then release it. Finally, restore power to the furnace.

Basic Thermostat Resets When your Wyze thermostat is not heating as expected, performing some basic thermostat resets can often resolve the issue. These resets can help troubleshoot common problems and get your thermostat working properly again. Below are the steps for performing a soft reset and a factory reset on your Wyze thermostat. Soft Reset Procedure To perform a soft reset on your Wyze thermostat, follow these simple steps:

1. Press and hold the Power button for 10 seconds.

2. Release the button when the display turns off.

3. Wait for a few seconds, then press the Power button again to turn the thermostat back on.

This soft reset can help resolve minor issues with your thermostat and restore its functionality. Factory Reset Steps If a soft reset doesn’t solve the issue, you can perform a factory reset on your Wyze thermostat. Follow these steps to do a factory reset:

1. Press and hold the Menu and Power buttons simultaneously for 10 seconds.

2. Release the buttons when the display turns off.

3. Wait for a few seconds, then press the Menu button to turn the thermostat back on.

Performing a factory reset will restore the thermostat to its original settings, which can help address more complex issues with heating or other functionality. By following these basic thermostat resets, you can often troubleshoot and resolve common issues with your Wyze thermostat when it’s not heating properly.

Inspecting Thermostat Wiring

To troubleshoot a Wyze thermostat not heating, inspect the thermostat wiring. Check for loose connections and ensure that the wires are properly attached to the corresponding terminals. A faulty wiring connection can cause the thermostat to malfunction and prevent the heating system from turning on.

Safety Precautions

Wiring Connection Assessment

Heating System Compatibility

One of the common issues that users may encounter with the Wyze Thermostat is the problem of it not heating properly. This can be a frustrating situation, especially during the colder months. The root cause of this problem can often be traced back to the compatibility of the thermostat with the heating system in your home. It’s crucial to ensure that your HVAC system is compatible with the Wyze Thermostat to achieve optimal performance and efficient heating.

Compatible Hvac Systems

When it comes to ensuring that your Wyze Thermostat functions effectively in heating your home, it is important to take into consideration the compatibility of your HVAC system. The Wyze Thermostat is compatible with most 24V heating and cooling systems, including gas, oil, electric, and dual fuel systems. It also works with forced air, hydronic, heat pump with or without auxiliary heat, and radiant systems. However, compatibility can vary based on the specific wiring and setup of your heating system.

Troubleshooting With Wyze Compatibility Checker

If you are experiencing issues with the heating function of your Wyze Thermostat, the first step is to utilize the Wyze Compatibility Checker. This tool helps you determine if your HVAC system is compatible with the thermostat. By following the simple instructions provided by Wyze, you can troubleshoot any compatibility issues and ensure that your heating system is effectively integrated with the thermostat.

Upgrading Firmware

One common issue with the Wyze Thermostat that users may encounter is the device not heating properly. In many cases, this can be attributed to outdated firmware. Updating the thermostat’s firmware can often resolve heating issues and improve its overall performance.

Checking Firmware Version

To begin the process of updating the firmware on your Wyze Thermostat, you’ll first need to check the current version installed on the device. This can be done by navigating to the thermostat’s settings menu and locating the firmware information.

Steps To Update Firmware

Once you have identified the current firmware version, follow these steps to update the firmware on your Wyze Thermostat:

  1. Ensure the thermostat is connected to a stable Wi-Fi network.
  2. Open the Wyze app on your smartphone or tablet.
  3. Navigate to the Devices section and select your Wyze Thermostat.
  4. Check for any available firmware updates for the device.
  5. If an update is available, follow the on-screen instructions to download and install the latest firmware.
  6. Once the update is complete, reboot the thermostat to apply the changes.

Professional Assistance

When dealing with a Wyze thermostat not heating, seeking professional assistance can be crucial for resolving the issue effectively. Whether it’s troubleshooting a malfunctioning thermostat or optimizing heating performance, professional help can provide the expertise needed to ensure your home remains comfortable and energy-efficient.

When To Call An Hvac Technician

If you notice persistent heating issues with your Wyze thermostat, such as inconsistent temperature regulation or cold spots, it may be time to seek the expertise of an HVAC technician. Their specialized knowledge can pinpoint and address complex heating system issues, ensuring optimal functionality.

Finding A Certified Wyze Installer

When considering professional assistance for your Wyze thermostat, finding a certified Wyze installer is essential. They possess the specific training and experience needed to effectively diagnose and address thermostat-related issues, ensuring that your heating system operates at its best.

Preventive Measures

Wyze Thermostat Not Heating issues can be frustrating. However, with the right preventive measures, you can ensure efficient operation and avoid potential problems. By implementing regular maintenance tips and monitoring thermostat performance, you can maximize the effectiveness of your thermostat and maintain a comfortable indoor environment.

Regular Maintenance Tips

Regular maintenance plays a crucial role in ensuring that your Wyze thermostat operates effectively. Here are some essential maintenance tips to keep in mind:

  • Clean the thermostat: Dust and debris can accumulate over time, affecting the thermostat’s functionality. Regularly clean the thermostat to prevent any blockages.
  • Check for wiring issues: Inspect the wiring connections to ensure they are secure and free from damage. Loose or damaged wiring can impact the thermostat’s performance.
  • Replace batteries: If your thermostat uses batteries, make sure to replace them according to the manufacturer’s recommendations to maintain consistent power supply.

Monitoring Thermostat Performance

Monitoring your thermostat’s performance is essential for detecting any issues early on. Consider the following steps to monitor the thermostat:

  1. Regular temperature checks: Keep an eye on the temperature readings to ensure they align with your settings. Sudden fluctuations may indicate a problem.
  2. Observe system cycles: Pay attention to how frequently the heating system cycles on and off. Irregular cycles could signal an underlying issue.
  3. Utilize smart features: If your thermostat has smart features, take advantage of the data and insights it provides to monitor performance and identify any anomalies.

Frequently Asked Questions

Why Is My Thermostat Working But No Heat?

If your thermostat is working but there is no heat, it may be due to a variety of reasons. Check if the thermostat is set to heat mode and the temperature is set higher than the current room temperature. Ensure that the circuit breaker for the heating system is not tripped.

If these steps don’t resolve the issue, it is recommended to contact a professional HVAC technician for further assistance.

Why Is My Thermostat Not Turning On My Heating?

If your thermostat is not turning on your heating, it could be due to several reasons. Check if the thermostat is set to the correct temperature and mode. Ensure that the batteries are not dead and the power is connected.

If the issue persists, you may need to call a professional HVAC technician to diagnose and fix the problem.

Why Is My Wyze Thermostat Not Turning On My Furnace?

Check if the thermostat is correctly installed and wired. Ensure the power source is on. Verify the furnace compatibility with the Wyze thermostat.

Why Is My Thermostat Not Controlling My Heat?

A malfunctioning thermostat may be due to wiring issues, dead batteries, or a faulty sensor.


In troubleshooting Wyze Thermostat heating issues, check settings, power source, and wiring. Regular maintenance can prevent problems. Keep filters clean and ensure proper installation. By following these tips, you can ensure your thermostat functions efficiently, keeping your home comfortable. Regular check-ups and maintenance are key.

Scott Maupin