Wyze Thermostat Clicking Not Turning On: Fixing Guide

If your Wyze Thermostat is clicking but not turning on, check for loose wiring connections. Ensure proper installation.

Having a programmable thermostat like the Wyze can help you save energy and money by regulating your home’s temperature efficiently. However, encountering issues with your thermostat, such as clicking sounds without turning on, can be frustrating. In this blog post, we will explore common reasons why your Wyze Thermostat may be clicking but not functioning correctly.

By identifying the potential causes and solutions, you can troubleshoot the problem and get your thermostat back up and running smoothly. Let’s dive into the possible reasons behind this issue and how you can resolve it effectively.

Introduction To Wyze Thermostat Clicking Issue

Experiencing a Wyze Thermostat clicking issue where it’s not turning on? This problem can be caused by various factors such as a power supply issue, wiring problems, or a faulty thermostat. Troubleshooting the power source and checking the wiring connections can help resolve this issue and get your thermostat up and running again.

Wyze Thermostat is a smart thermostat that allows users to control their home temperature from their smartphones. However, users have reported issues with the thermostat clicking but not turning on. This issue can be frustrating, especially during extreme weather conditions.

In this article, we will discuss the common symptoms of startup failures and initial troubleshooting steps to resolve the Wyze Thermostat clicking issue.

Common Symptoms Of Startup Failures

There are a few common symptoms that indicate the Wyze Thermostat clicking issue. These include:

  • Thermostat clicks but does not turn on
  • Display is not responsive
  • No heating or cooling is happening despite the thermostat being set to the desired temperature

If you experience any of these symptoms, your Wyze Thermostat is likely experiencing startup failures.

Initial Troubleshooting Steps

Before contacting Wyze support, you can try a few initial troubleshooting steps to resolve the clicking issue. These include:

  1. Check the thermostat wiring: Make sure that the wiring is correctly installed and secure. Loose wiring can cause the thermostat to click but not turn on.
  2. Reset the thermostat: Press and hold the thermostat button for 10 seconds until the display turns off. Release the button, and the thermostat will restart.
  3. Check the circuit breaker: Make sure that the circuit breaker for your HVAC system is not tripped. If it is, reset it and try turning on the thermostat again.
  4. Check the batteries: If your Wyze Thermostat uses batteries, make sure they are not dead. Replace the batteries if necessary.

If none of these initial troubleshooting steps resolve the issue, you may need to contact Wyze support for further assistance. In conclusion, the Wyze Thermostat clicking issue can be frustrating, but there are a few initial troubleshooting steps you can take to resolve the issue.

By following the above steps, you can ensure that your Wyze Thermostat is working correctly and keeping your home at the desired temperature.

Safety First: Precautions Before Troubleshooting

Before attempting to troubleshoot a Wyze Thermostat that is not turning on and clicking, it is important to prioritize safety. Taking the necessary precautions can help prevent accidents and ensure a smooth troubleshooting process.

In this section, we will outline the power shutdown procedures and the tools and safety gear you will need to safely troubleshoot your Wyze Thermostat.

Power Shutdown Procedures

Before working on any electrical device, it is crucial to cut off the power supply to avoid the risk of electric shock. Follow these power shutdown procedures:

  1. Locate the circuit breaker panel in your home.
  2. Identify the breaker that controls the power supply to your thermostat.
  3. Switch off the breaker by flipping it to the “off” position.
  4. Double-check that the power to the thermostat is indeed off by attempting to turn it on.

By following these power shutdown procedures, you can ensure that you are working on the thermostat safely without any power supply.

Tools And Safety Gear

Having the right tools and safety gear is essential for a safe and effective troubleshooting process. Here are the tools and safety gear you will need:

Tools Safety Gear
  • Screwdriver set
  • Wire cutter/stripper
  • Electrical tape
  • Insulated gloves
  • Safety goggles
  • Non-conductive mat

These tools will help you safely access and inspect the thermostat’s wiring and components, while the safety gear will protect you from any potential electrical hazards.

Remember, safety should always be your top priority when troubleshooting any electrical device. By following the proper power shutdown procedures and using the necessary tools and safety gear, you can ensure a safe and successful troubleshooting process for your Wyze Thermostat.

Basic Checks: Ensuring Proper Setup

If you are experiencing issues with your Wyze thermostat, such as clicking but not turning on, it may be due to improper setup. Before calling for professional help, there are some basic checks you can perform to ensure proper installation and wiring connections.

Verifying Thermostat Installation

The first step is to ensure that the thermostat is installed correctly. Check the following:

  • Ensure that the thermostat is mounted level and securely on the wall.
  • Verify that the thermostat is not exposed to direct sunlight, drafts, or other sources of heat or cold.
  • Ensure that the thermostat is not located near any sources of interference, such as other electronic devices or appliances.

Checking Wiring Connections

Once you have verified proper installation, the next step is to check the wiring connections. Ensure that:

  • The wiring connections are secure and not loose.
  • The wires are properly connected to the terminals on the thermostat.
  • The wiring is not damaged or frayed.
  • The wiring is not touching any other wires or metal components, which could cause a short circuit.

If you find any issues with the installation or wiring connections, refer to the Wyze thermostat installation guide or contact Wyze customer support for assistance. By performing these basic checks, you may be able to resolve the issue and avoid the need for professional assistance.

Power Supply: Solving Electrical Problems

Inspecting Circuit Breakers And Fuses

Check circuit breakers for tripped switches or blown fuses.

Testing The Power Source

Ensure power source is operational and providing adequate voltage.

Thermostat Settings: Configuration And Calibration

When it comes to ensuring the optimal performance of your Wyze thermostat, understanding and properly configuring the settings is essential. The thermostat settings not only affect the comfort level of your home but also impact energy efficiency and cost savings.

Calibration of the temperature settings is crucial for accurate readings and efficient operation of the thermostat.

Resetting The Thermostat

Resetting the thermostat can help troubleshoot issues related to clicking and turning on. Follow these steps to reset your Wyze thermostat:

  1. Access the thermostat menu and navigate to the “Settings” option.
  2. Select “Reset” and confirm the action to restore the thermostat to its default settings.

Calibrating Temperature Settings

Calibrating the temperature settings ensures accurate readings and efficient operation of the thermostat. Here’s how you can calibrate the temperature settings:

  1. Access the thermostat menu and navigate to the “Temperature Calibration” option.
  2. Follow the on-screen instructions to adjust the temperature readings to match a reliable thermometer.

Firmware Updates: Keeping Your Device Up-to-date

When it comes to your Wyze Thermostat, keeping the firmware up-to-date is crucial for ensuring optimal performance. Firmware updates not only fix bugs and security vulnerabilities but also introduce new features and improvements to your device. In the case of the Wyze Thermostat clicking not turning on an issue, a firmware update might provide the solution you need.

Checking For The Latest Firmware

Before proceeding with the update process, it’s essential to check if there’s a new firmware version available for your Wyze Thermostat. To do this, follow these simple steps:

  1. Open the Wyze app on your mobile device.
  2. Navigate to the “Devices” tab and select your Wyze Thermostat.
  3. Tap on “Settings” and then “Device Info.”
  4. Check the “Firmware Version” to see if it’s the latest one available.

Steps To Update Your Wyze Thermostat

Once you’ve confirmed that there’s a new firmware version for your Wyze Thermostat, you can proceed with the update by following these steps:

  1. Ensure that your Wyze Thermostat is connected to a stable Wi-Fi network.
  2. Open the Wyze app and navigate to the “Devices” tab.
  3. Select your Wyze Thermostat and tap on “Settings.”
  4. Choose “Device Info” and then “Firmware Version.”
  5. If a new firmware version is available, you will see an option to “Update” the firmware. Tap on this option to initiate the update process.
  6. Wait for the update to complete, and once done, your Wyze Thermostat will be running on the latest firmware version.

Professional Help: When To Call A Technician

When you encounter problems with your Wyze thermostat, it’s essential to know when it’s time to seek professional help. While many issues can be resolved through DIY methods, some problems may require the expertise of a qualified HVAC technician.

Identifying Issues Beyond Diy Fixes

If you find that the clicking of your Wyze thermostat is not turning it on, there may be underlying issues that go beyond simple DIY fixes. It could be related to electrical connections, faulty wiring, or compatibility issues with your HVAC system.

When troubleshooting the problem, consider checking for loose wiring, ensuring the thermostat is compatible with your HVAC system, and verifying the power source. If these basic checks do not resolve the issue, it’s time to seek professional assistance.

Finding A Qualified Hvac Professional

When it comes to finding a qualified HVAC professional to address your thermostat issues, it’s crucial to do your research. Look for technicians who are experienced in working with smart thermostats and have a good track record of solving similar issues.

Ensure that the technician is licensed and certified, and has a good reputation for providing reliable and efficient service. Additionally, consider seeking referrals from friends or family members who have had positive experiences with HVAC professionals.

Preventive Measures: Avoiding Future Clicking Issues

The Wyze thermostat clicking not turning on the issue can be frustrating, but taking preventive measures can help you avoid future clicking issues. By implementing regular maintenance tips and smart usage habits, you can ensure the smooth functioning of your thermostat and prevent potential problems.

Regular Maintenance Tips

Regular maintenance is essential for keeping your thermostat in good working condition. Here are some maintenance tips to follow:

  • Clean the thermostat: Dust and debris can affect the performance of your thermostat. Regularly clean the device to prevent any potential issues.
  • Check the wiring: Inspect the wiring connections to ensure they are secure and free from any damage. Loose or damaged wiring can lead to clicking and other problems.
  • Change the batteries: If your thermostat uses batteries, replace them regularly to prevent power-related issues.

Smart Usage Habits

Adopting smart usage habits can help in avoiding future clicking issues with your thermostat. Here are some tips to consider:

  1. Set appropriate temperatures: Avoid frequently adjusting the temperature settings, as this can put strain on the thermostat and lead to clicking problems.
  2. Keep vents clear: Ensure that the vents and air ducts are not obstructed, as this can affect the airflow and cause issues with the thermostat.
  3. Schedule regular checks: Periodically inspect the thermostat and HVAC system to catch any potential issues early on.

Conclusion: Ensuring Continued Performance

After troubleshooting the Wyze thermostat clicking not turning on issue, it’s essential to focus on maintenance to ensure continued performance. By following the necessary steps and emphasizing regular upkeep, you can keep your thermostat functioning optimally.

Recap Of Troubleshooting Steps

First, check the power supply to the thermostat. Ensure it’s receiving power and that the circuit breaker hasn’t tripped. Next, verify the wiring connections. Make sure all wires are securely connected and there are no loose connections. Then, reset the thermostat to see if that resolves the issue. If the problem persists, contact customer support for further assistance.

Emphasizing The Importance Of Maintenance

Maintaining your thermostat is crucial for its performance. Regularly clean the thermostat to prevent dust accumulation that could affect its functionality. Additionally, schedule professional maintenance to inspect and tune up the thermostat, ensuring it operates efficiently.

Frequently Asked Questions

Why Is My Thermostat Clicking But Not Turning On?

A clicking thermostat may indicate a faulty relay or sensor. Check for loose wiring or a tripped circuit breaker.

Why Is My Wyze Thermostat Not Turning On?

If your Wyze thermostat is not turning on, check if it’s receiving power and properly connected to the HVAC system. Make sure the circuit breaker is on and the wires are properly installed. Restart the thermostat and check the batteries.

If the issue persists, contact Wyze customer support for assistance.

Why Does My Digital Thermostat Keep Clicking?

A digital thermostat may keep clicking due to several reasons, such as a faulty relay, loose wiring connections, or a malfunctioning temperature sensor. It is recommended to have a professional HVAC technician inspect and repair the thermostat to resolve the clicking issue and ensure proper functionality.

Why Is My AC unit Clicking But Not Turning On?

Your AC unit may be clicking but not turning on due to a faulty capacitor, thermostat, or compressor. It could also be caused by a tripped circuit breaker or a dirty air filter. Check these components and contact a professional if needed.


To conclude, if you’re experiencing a clicking sound from your Wyze Thermostat and it’s not turning on, there are a few potential causes to consider. It could be a wiring issue, a power supply problem, or a malfunctioning thermostat unit.

By troubleshooting these possibilities, you can identify the root cause and take appropriate measures to resolve the issue. Remember to always refer to the manufacturer’s guidelines or seek professional help if needed to ensure the proper functioning of your thermostat.

Scott Maupin