Honeywell Thermostat Wait Won’t Go Away: Quick Fixing Guide

If the “Wait” message on your Honeywell thermostat won’t go away, try resetting it by removing the batteries or resetting the circuit breaker. Check the thermostat’s manual for specific instructions.

Dealing with a Honeywell thermostat showing a “Wait” message that won’t disappear can be frustrating. However, by following a few troubleshooting steps, you can resolve this issue and get your thermostat back to normal functioning.

In this blog, we’ll explore some common reasons why the “Wait” message may persist on your Honeywell thermostat and provide practical solutions to help you resolve the problem.

By the end of this article, you’ll have a clear understanding of how to troubleshoot and fix the “Wait” message on your Honeywell thermostat.

Introduction To The Honeywell Thermostat Wait Issue

Experiencing the Honeywell thermostat wait issue? If the wait message doesn’t disappear, try resetting the thermostat for a quick fix. Check for any loose connections or consult the user manual for troubleshooting steps.

Common Signs Of ‘Wait’ Message

If your Honeywell thermostat displays a ‘Wait’ message, it can be frustrating. The issue often arises due to system delays or incorrect settings.

Why Quick Fixes Are Essential

Quick fixes are essential to resolve the ‘Wait’ message promptly. Ignoring it can lead to discomfort and inefficiency in temperature control.

Troubleshooting Basics

Encountering the “Honeywell thermostat wait won’t go away” issue requires troubleshooting basics. Restart the thermostat, check power sources, and reset the settings to resolve the persistent wait problem efficiently.

If your Honeywell thermostat display shows “Wait” and doesn’t seem to be responding, it can be frustrating. Fortunately, there are a few troubleshooting basics you can try before calling a professional. In this section, we’ll cover the initial checks and reset procedures to fix the “Wait” error.

Initial Checks

Before diving into more complex solutions, let’s start with some initial checks:

  • Make sure the thermostat is properly connected to your HVAC system and power supply.
  • Check if the thermostat’s batteries are low or dead. If so, replace them.
  • Verify that the thermostat is set to the correct temperature and operating mode (heating or cooling).
  • Ensure that the air filter in your HVAC system is clean and not clogged.

If any of the above checks reveal an issue, fix it and see if it resolves the “Wait” error. If not, proceed to the reset procedures.

Reset Procedures

Resetting your Honeywell thermostat can often help resolve the “Wait” error. Here are some reset procedures to try:

  • Try turning off the thermostat and turning it back on after a few minutes.
  • Reset the thermostat to its default factory settings. This will erase all user settings, so make sure you have them written down before proceeding.
  • If none of the above methods work, try resetting the entire HVAC system by turning off the power supply for a few minutes.

If the “Wait” error persists after trying these troubleshooting basics, it may be time to call a professional HVAC technician for further assistance.

Power Cycle The Thermostat

When your Honeywell thermostat displays the “Wait” message and doesn’t go away, performing a power cycle on the thermostat may help to resolve the issue. Power cycling involves turning off the thermostat, waiting for a few minutes, and then turning it back on. This simple process can reset the device and clear any temporary glitches that may be causing the “Wait” message to persist.

Step-by-step Guide

Follow these steps to power cycle your Honeywell thermostat:

  1. Locate the main power switch for your heating and cooling system and turn it off.
  2. Next, go to your thermostat and remove it from the wall plate.
  3. Remove the batteries from the thermostat if it operates on battery power.
  4. Wait for at least 5 minutes to ensure that the thermostat is completely powered down.
  5. After the waiting period, reinsert the batteries (if applicable) and reattach the thermostat to the wall plate.
  6. Finally, return to the main power switch for your heating and cooling system and turn it back on.

Safety Precautions

Before power cycling your thermostat, it’s important to take some safety precautions to avoid any mishaps:

  • Ensure that the power switch for your heating and cooling system is in an easily accessible location.
  • Handle the thermostat and its components carefully to avoid damage.
  • Double-check the location of the power switch and make sure it is indeed for the heating and cooling system.

Inspecting The HVAC System

When dealing with a Honeywell thermostat issue, one crucial step in troubleshooting is inspecting the HVAC system. This involves checking various components to ensure they are functioning properly and not causing the “Wait” message to persist. Inspecting the HVAC system includes assessing the air filters and power supply.

Checking The Air Filters

Dirty air filters can restrict airflow, causing the HVAC system to work harder and potentially trigger the “Wait” message on the thermostat. Regularly inspect and replace clogged or dirty air filters to ensure proper airflow and prevent system strain.

Assessing The Power Supply

A faulty power supply can lead to issues with the thermostat and HVAC system. Check for loose connections, tripped breakers, or blown fuses that may be disrupting the power supply. Ensure the thermostat is receiving a stable power source to eliminate potential causes of the “Wait” message.

Understanding Thermostat Schedules

One of the key features of a Honeywell thermostat is its ability to follow pre-set schedules, ensuring optimal comfort and energy efficiency. Understanding thermostat schedules is crucial for managing the wait time issue effectively.

Reviewing Program Settings

To address the wait time issue, start by reviewing the program settings on your Honeywell thermostat. Check the time and temperature settings for each period of the day, such as mornings, afternoons, evenings, and nights. Ensure that the programmed settings align with your daily routine and comfort preferences.

Adjusting The Wait Time

If the wait time won’t go away, consider adjusting the delay settings on your thermostat. Depending on your model, you can modify the wait time between heating or cooling cycles. By reducing the wait time, you can experience quicker temperature adjustments without compromising energy efficiency.

Software Glitches And Updates

Software glitches and updates can be a common cause of issues with Honeywell thermostats. Identifying and addressing software issues is crucial to ensuring that your thermostat functions as expected. Updating the thermostat firmware is often necessary to resolve software-related problems.

Identifying Software Issues

When your Honeywell thermostat displays the “Wait” message without going away, it could be due to a software glitch. Check for any error codes or unusual behavior that may indicate a software issue. Additionally, review the thermostat’s performance history to identify any recurring patterns or anomalies that could point to a software-related problem.

Updating Thermostat Firmware

To address software glitches, updating the thermostat firmware is often necessary. Check for available firmware updates for your specific Honeywell thermostat model. Follow the manufacturer’s instructions to download and install the latest firmware version. After updating the firmware, monitor the thermostat’s performance to ensure that the “Wait” message issue has been resolved.

Professional Assistance

Seeking professional assistance with a persistent “Honeywell Thermostat Wait” issue? Get expert help to resolve the problem and restore your thermostat’s functionality. Don’t let the wait message linger – reach out to experienced professionals for prompt support.

When To Call A Technician

If you have tried all the basic troubleshooting steps and still cannot get rid of the Honeywell thermostat wait error message, it may be time to call in a professional technician. Here are a few signs that indicate that it’s time to seek professional assistance:

  • If you are not comfortable working with electrical devices.
  • If you have tried all the basic troubleshooting steps, but the problem persists.
  • If you notice any strange noises or smells coming from the thermostat or the HVAC system.
  • If you have recently installed a new thermostat or made any changes to the HVAC system.
  • If the wait message is accompanied by other error codes or malfunctions.

What To Expect From A Service Visit

When you call a professional technician, they will arrive at your home or office and diagnose the issue. Here’s what you can expect during a service visit:

  1. The technician will inspect the thermostat and the HVAC system to identify the root cause of the problem.
  2. They will perform any necessary repairs or replacements to fix the issue.
  3. They may also perform routine maintenance tasks on your HVAC system to ensure its optimal performance.
  4. The technician will test the thermostat and the HVAC system to ensure that the issue has been resolved and that everything is working correctly.
  5. The technician will provide you with a detailed report of the work done and any recommendations for future maintenance.

Overall, seeking professional assistance is the best way to fix the Honeywell thermostat wait error message. A trained technician can quickly diagnose and fix the problem, ensuring that your HVAC system is working efficiently and effectively.

Preventative Measures

Regular Maintenance Tips

Perform regular maintenance to ensure the proper functioning of your Honeywell thermostat.

Avoiding Common Mistakes

Avoid common mistakes to prevent the ‘Wait’ issue from persisting on your thermostat.

Frequently Asked Questions

Why Is My Thermostat Stuck On Wait?

A thermostat stuck on “Wait” may be due to a delay setting or a malfunction. Check the delay settings and replace the batteries. If the issue persists, consider seeking professional help to troubleshoot and fix the problem.

How Do You Clear The Hold On A Honeywell Thermostat?

To clear a hold on a Honeywell thermostat, go to the schedule, select the hold, and press cancel.

What Does Wait Permanent Hold Mean On Honeywell Thermostat?

“Wait permanent hold on a Honeywell thermostat means the system is in a paused state indefinitely. “

How Do I Reset My Honeywell Thermostat?

To reset your Honeywell thermostat, locate the reset button and press it. Follow the manual instructions for further guidance.


Ensure your Honeywell thermostat is properly configured to resolve the “Wait” message issue promptly. Follow the troubleshooting steps provided to restore your thermostat’s functionality and maintain a comfortable home environment. Stay informed, take action, and enjoy hassle-free temperature control with your Honeywell thermostat.

Scott Maupin