Braeburn Thermostat Keeps Resetting to 85 Degrees – [Fixed]

Is your Braeburn thermostat playing tricks on you, seemingly stuck at an uncomfortable 85 degrees? Dealing with a thermostat that keeps resetting to an undesirable temperature can be frustrating, affecting both your comfort and energy bills. 

In this guide, we’ll dive into the perplexing issue of the Braeburn thermostat keeps resetting to 85 degrees and explore effective solutions to put an end to this inconvenience. Discover the reasons behind this unusual behavior and learn step-by-step what you can do to regain control over your home’s climate. 

Say goodbye to the annoyance of a thermostat that just won’t behave, as we uncover the secrets to keeping your living space at the temperature you desire.

What is Braeburn Thermostat Resetting to 85 Degrees?

The first step in resolving any issue is to gain a clear understanding of what’s actually happening. If you’ve noticed that your Braeburn thermostat repeatedly resets to 85 degrees, you’re not alone. 

This behavior indicates that the thermostat is not functioning as it should, and it’s important to grasp the specifics of this problem.

When your thermostat consistently resets to 85 degrees, it essentially means that the temperature setting reverts to this specific value, regardless of your preferences or previous settings. 

This can lead to discomfort, energy wastage, and confusion about why your thermostat seems to have a mind of its own.

It’s worth noting that while this issue might be more common with Braeburn thermostats, it’s not exclusive to them. Similar problems can occur with various thermostat models due to a range of underlying causes. 

8 Possible reasons why your Braeburn thermostat may keep resetting

The enigma of a Braeburn thermostat constantly resetting to 85 degrees can have multiple layers, and understanding a broader spectrum of potential causes is crucial for a comprehensive solution. 

To effectively address this perplexing behavior, consider these additional factors that might contribute to the issue:

1. Malfunctioning Temperature Sensor

A temperature sensor encountering technical glitches, accumulating dirt, or experiencing calibration irregularities could inaccurately signal the thermostat to reset to 85 degrees.

2. Programming Conflicts

Complex programming schedules or conflicting settings might trigger the thermostat to reset to a default value like 85 degrees. Review intricate programming scenarios that could inadvertently initiate this behavior.

3. Inconsistent Power Supply

Electrical fluctuations or intermittent wiring connections causing variations in the power supply can disrupt the thermostat’s functionality, leading to unexpected resets.

4. Interference or Signal Loss

Wireless interference or signal loss between the thermostat and its controller could result in communication breakdowns, compelling the thermostat to revert to a default setting.

5. Temperature Differential Setting

Some thermostats incorporate a temperature differential setting, determining when the system turns on or off. An incorrect setting may lead to frequent cycling, giving the appearance of repeated resets.

6. User Error

Unintentional user actions, such as accidental button presses or inadvertent programming alterations, might initiate the thermostat’s reset to 85 degrees.

7. Hardware Wear and Tear

Over time, components within the thermostat might degrade due to wear and tear, resulting in erratic behavior including resetting to default values.

8. Remote Control or App Issues

If you’re using a remote control or a mobile app to adjust thermostat settings, connectivity problems between devices might play a role in unexpected resets.

Troubleshooting Steps for Braeburn Thermostat Keeps Resetting To 85 degree

If your Braeburn thermostat is set to 85 degrees and you’re unable to reset it to a lower temperature, there could be a few reasons for this issue. Here are some troubleshooting steps you can take to resolve the problem:

Step 1: Check the Power Supply

Ensure that the thermostat has power. If the display is not working or is dim, the thermostat might not be receiving power. Check if the circuit breaker for your HVAC system is tripped or if there’s a blown fuse. Also, make sure the thermostat is securely mounted on the wall and properly connected to its base.

Step 2: Thermostat Settings

Make sure you are navigating through the thermostat menu correctly. Check the user manual for your specific Braeburn thermostat model to ensure you’re using the correct buttons and settings to adjust the temperature.

Step 3: Reset the Thermostat

Some thermostats have a reset button or a reset process. Consult your thermostat’s user manual to find out how to perform a factory reset. This can often resolve software glitches that might be causing incorrect temperature settings.

Step 4: Battery Replacement

If your thermostat uses batteries for power, check if they need to be replaced. Low or dead batteries can cause display issues and prevent proper temperature adjustments.

Step 5: Calibration

Some thermostats offer calibration options to correct temperature discrepancies. If your thermostat has this feature, consult the user manual to see how to recalibrate it.

Step 6: Check for Temperature Limits

Some thermostats have a temperature limit feature that prevents users from setting temperatures outside a certain range. Check if your thermostat has this feature enabled and adjust the settings if necessary.

Step 7: HVAC System Issues

If the thermostat appears to be functioning correctly but the temperature is not changing, there might be an issue with your heating or cooling system. It’s possible that the HVAC system itself is malfunctioning, preventing it from reaching the desired temperature.

Step 8: Contact Support

If you’ve tried the above steps and still can’t resolve the issue, consider reaching out to Braeburn’s customer support or consulting a professional HVAC technician. They can provide more specific guidance based on your thermostat model and system setup.

Remember that the troubleshooting steps may vary depending on your specific Braeburn thermostat model, so referring to the user manual for your thermostat is crucial. If you’re uncomfortable performing these steps yourself, it’s always a good idea to seek assistance from a professional technician

6 Preventive Measures for Resetting Braeburn Thermostat Keeps to 85 Degrees Again

Preventing your Braeburn thermostat from repeatedly resetting to 85 degrees involves a combination of vigilance and regular maintenance. 

By taking proactive steps, you can minimize the chances of encountering this issue again in the future. Here are some preventive measures to consider:

1. Regular Firmware Checks

Stay on top of firmware updates for your thermostat. Periodically check the manufacturer’s website or your thermostat’s user manual for information on the latest firmware versions. Updating the firmware can help prevent glitches that lead to unexpected resets.

2. Double-Check Programming

Whenever you adjust your thermostat settings or experience a power outage, double-check the programming to ensure that your desired temperature settings are maintained. Paying attention to these details can help prevent inadvertent resets.

3. Keep the Thermostat Clean

Dust and debris can accumulate on the thermostat’s sensors and components, affecting its performance. Regularly clean the thermostat with a soft, dry cloth to ensure accurate readings and prevent malfunctioning.

4. Monitor Sensor Accuracy

Occasionally verify that your thermostat’s temperature readings match the actual room temperature. If you notice discrepancies, recalibrate the temperature sensor according to the manufacturer’s instructions.

5. Avoid Power Fluctuations

Protect your thermostat from power surges and fluctuations by using surge protectors. Unstable power can lead to malfunctions and resets.

6. Document Custom Settings

If you’ve customized your thermostat’s settings, consider keeping a record of them. This documentation can be useful in case of unexpected resets, allowing you to quickly restore your preferred settings.

Additional Tips for Braeburn Thermostat Keeps Resetting

When it comes to troubleshooting the persistent issue of a Braeburn thermostat resetting to 85 degrees, real-life experiences and insights from other users can be invaluable. Here are some tips and insights from individuals who have successfully addressed this problem:

Check for Hidden Resets

Some users have found that accidentally hidden reset buttons on their thermostats were causing the issue. If your thermostat has a hidden reset button, make sure it’s not being pressed inadvertently.

Verify Wiring Connections

A user shared that loose or damaged wiring can lead to erratic thermostat behavior. Double-check all wiring connections to ensure they are secure and properly connected.

Update Regularly

Several users emphasized the importance of regularly updating their thermostat’s firmware. By staying up-to-date, they were able to prevent glitches that might cause the thermostat to reset.

Expert Assistance

If you’re unsure about performing advanced troubleshooting steps, consider seeking help from HVAC professionals. Their expertise can quickly identify and fix underlying issues.

Document Settings

Documenting your custom thermostat settings can save you time and frustration in case of a reset. Having a reference will make it easier to reconfigure the thermostat.

Inspect Temperature Sensor

Users have reported that a dirty or malfunctioning temperature sensor can trigger resets. Regularly inspect and clean the sensor to ensure accurate readings.

Stay Patient:

Resolving thermostat issues can take time and trial and error. Stay patient, and don’t hesitate to reach out for support if needed.

Frequently Asked Questions (FAQ’s)

What’s the importance of calibrating the temperature sensor?

Calibrating the temperature sensor ensures accurate temperature readings. If the sensor is inaccurate, it might cause the thermostat to reset to 85 degrees due to erroneous temperature measurements.

Should I perform a factory reset?

A factory reset can be a last-resort option if other troubleshooting steps don’t work. Keep in mind that a factory reset will erase your customized settings, so only proceed if necessary.

What if I’ve tried everything and the issue persists?

If you’ve exhausted all troubleshooting options and the problem persists, consider reaching out to Braeburn’s customer support or consulting HVAC professionals. They can offer specialized assistance and guidance.

How can I prevent future thermostat issues?

To prevent future resets, regularly update your thermostat’s firmware, double-check programming after any changes, keep the thermostat clean, monitor sensor accuracy, and avoid power fluctuations. Documenting your settings can also help.

Can power fluctuations cause thermostat resets?

Yes, power fluctuations and surges can disrupt a thermostat’s operation, leading to resets. Using surge protectors can help safeguard your thermostat from power-related issues.


In your quest to regain control over your home’s temperature, you’ve delved into the perplexing world of a Braeburn thermostat that keeps resetting to 85 degrees

Through understanding the problem, exploring potential causes, and following systematic troubleshooting steps, you’ve taken significant strides toward resolving this frustrating issue.

Remember that your thermostat is a key player in your comfort and energy efficiency. By addressing the problem head-on, you’re not only ensuring a more pleasant living environment but also potentially saving on energy costs in the long run.

Scott Maupin